The Ford Barn - Fender braces - "Inny" or "outty"

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Fender braces - "Inny" or "outty" (https://www.fordbarn.com/forum/showthread.php?t=192264)

pgerhardt

03-23-2016 12:33 PM

Fender braces - "Inny" or "outty"

2 Attachment(s)

In the spirit of "It is just as easy to do it correctly as incorrectly", do the bolts on the front fender braces face in (picture 1) or out (picture 2)?

BTW I KNOW. I should have taken pictures! But in this case there were so many things wrong with my tudor that putting them back the way they were is no guarantee that they would be correct. :D

31Tudor

03-23-2016 12:39 PM

Re: Fender braces - "Inny" or "outty"

Picture one is correct. Bolt heads out, nuts inside the frame.

pgerhardt

03-23-2016 01:34 PM

Re: Fender braces - "Inny" or "outty"

Thanks!

WestCoast

03-23-2016 10:36 PM

Re: Fender braces - "Inny" or "outty"

not familiar with those braces but if the bolt holes are square they take carriage bolts they have a round head

Mike V. Florida

03-24-2016 10:50 PM

Re: Fender braces - "Inny" or "outty"

Quote:

Originally Posted by WestCoast (Post 1264047)

not familiar with those braces but if the bolt holes are square they take carriage bolts they have a round head

He has the correct ones

All times are GMT -5. The time now is 09:12 AM.