![]() |
Closing statement addendum Before I go into the "lurking" mode, I wish to genuinely thank all of you that sent me the many PMs supporting my concerns with how the Ford Barn is functioning. Most appreciated..
It seems like the comments share some of the issues that have been brought up. Not only by me, but many others. Mostly the same message. With proper Forum Supervision and the willingness of everyone to be civil and tolerant, the Ford Barn will continue to be the winner. And, many thanks to all the subsequent responses to my engine installation. Too bad we all had to endure the beginning.. We can do this! Larry |
Re: Closing statement addendum What you have to remember is that it is just a damned old car. Don't let it affect your health. Nobody needs a heart attack or a stroke over a car, good luck in the lurking mode and come back soon. Wayne
|
Re: Closing statement addendum Missed your original post but it appears somebody "ruffled" your feathers. Don't leave the forum. It's easy for me to say as I've got thick skin.
Keep the questions coming. FWIW Paul in CT |
Re: Closing statement addendum Larry,
Well I can understand your issues and hope you keep on the Ford Barn... There are always some people who lack manners and all we can do is turn the other cheek and pray for them.... The very best to you, |
Re: Closing statement addendum I don't know what happened but I am sorry for any one who is unkind and I wish you well
|
Re: Closing statement addendum You have to have thick skin when dealing with people on the internet. Rod
|
Re: Closing statement addendum Quote:
Stick around Larry, not all of us have forgotten how much we didn't know when we were starting out. |
Re: Closing statement addendum Quote:
|
Re: Closing statement addendum Larry, stay with us. Remember what works for you may not work for me. What works for me may not work for you. We learn something from every post. Sometimes we learn what not to do. Good luck with your project.
|
Re: Closing statement addendum I whole heartedly agree Fordors, well said !!
|
Re: Closing statement addendum Quote:
|
Re: Closing statement addendum Quote:
|
Re: Closing statement addendum Larry
Please stay on Ford Barn as I and most others appreciate and use your postings to help us. I had worked on and saved the below message and was leery about using it until now. Please read: I like most others use the Ford Barn “The Forum” section to ask questions and learn and then apply these answers / replies to a specific need or project. There are hundreds of you out there that are extremely experienced / talented and have vast knowledge in all or certain areas. We all need to tap your brains and apply this knowledge before it is lost. With this being said, don’t you think that we need to use The Forum as a learning tool just as it was meant to be and not a chat room? If you don't know or have experience / knowledge of the topic at hand and just want to reply to accumulate a high number of postings, then you are not doing any of us justice. As time moves on, we are losing the experienced / knowledgeable people and the younger people that are getting involved in the Model A world are not as patience and will eventually go elsewhere to get answers if they have to sort thru the unnecessary answers / responses to important threads. This will eventually result in the Ford Barn’s “The Forum” section’s demise and our source to learn from. |
Re: Closing statement addendum Quote:
Some of my students were very sensitive to criticism. I used to tell them that when someone said something negative to them that only two situations applied. One was the statement was true. In that case you probably already new that. Learn from the encounter and move on. Or two, it was false. In that case just ignore the comment and move on! |
Re: Closing statement addendum Larry,
Sorry they ruffled your feathers. This discussion about your engine install has been going on for quite some time. Everyone has their opinions and suggestions to offer. However in the end you must decide how you are going to approach this, and then follow through. You are certainly not the first to have their feathers ruffled on this forum. And I doubt you will be the last. Anytime there is a forum this large and diversified you are going to have an occasional conflict or disagreement. We are somewhat fortunate that the site administrator gives us some leeway before stepping in. Most of the advice you have received on this forum has been very good information, I really hope you continue to use the help that is available on this forum to assist you with your restoration project. As you already know, some if the help available on the is site cannot be found anywhere else. I personally enjoy reading your post. It often makes me remember the struggles I also had in the earlier years of this hobby. |
Re: Closing statement addendum Larry, we are all a part of this hobby, the good and the bad. I do not understand why some people feel that they need to "Flame" someone, often not saying something is better. I do understand you feelings. If there is anyway I can help in the future with my limited knowledge of As please feel free to email or PM me.
|
Re: Closing statement addendum Whoops my apologies on the thread rating in reality I don't pay much attention to them either.
But somebody had rated it low I guess and it did catch my eye. Hopefully Mr. Jenkins gets his original post straightened out. Didn't mean to stir the pot was just bad timing on a sore subject:eek: I will go back and delete same. |
Re: Closing statement addendum Going against my own feelings on PM's I will post this for all to see as it may apply to others-
Jeff, do not take my thoughts on the thread rating system as any sort of personal attack on you. That was not my intent and I guess I should have worded my thoughts better. I still do not see the need to rate threads, prefer to send a PM when needed so as not to waste Ryan's bandwidth and will continue to post only when I have a legitimate thought or answer to a thread. BTW, Woo Hoo, only 10 more posts and I'm at 1000! |
Re: Closing statement addendum Quote:
|
Re: Closing statement addendum Whoops my apologies on the thread rating
I didn't even know there was a thread rating so I guess I don't pay attention to the rating either. LOL |
| All times are GMT -5. The time now is 08:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.