47 59ab Walt
 

59ab just left a few weeks ago. 276 4in. crank, Max-1 cam, Walt

Re: 47 59ab Walt
 

59ab,, 276,, .125 bore,,4in.crank,,Max 1 cam,, dual 97,, going in a 34 3 window coupe stock body. Walt

Re: 47 59ab Walt
 

Hi Walt, I have a dumb question, I have never seen a 59ab with heads like that, it looks like they say Edmunds but what's with the water outlets forward like an 8ba? Ken

Re: 47 59ab Walt
 

Look like Edmunds 8BA heads on 59AB , a very popular thing to do .... = any 8BA heads on a 59AB
Cheers
Tony

Re: 47 59ab Walt
 

Hey Walt, twice is nice:D. I also like the look with those 8BA heads. Scott

Re: 47 59ab Walt
 

Yea there Edmunds 8ba heads, but we had a problem after starting and run a little while, had a leak in one cyl, the head was junk had a crack inside, they had a hard life, milled a lot, some one installed heads nut with out flat washers, buggered top of heads, should of had them spot faced but wouldn't help inside. Wound up installing a new set of Edelbrock. Walt