1928 phaeton top iron hole
 

Dear colleagues,

I need of some guidance about my 1928 Phaeton.

Could anyone tell me for what was the hole made for in the photo?

Your guidance would be helpful for me.

Thanks!

Re: 1928 phaeton top iron hole
 

Side curtain attach pin?

Re: 1928 phaeton top iron hole
 

Yes, I believe that is exactly what it is.

Re: 1928 phaeton top iron hole
 

any help on what type of fastener is ? part number?

Re: 1928 phaeton top iron hole
 

Call,Bonnie labaron they made my side curtains and did a beautiful job ,im shure they can help!

Re: 1928 phaeton top iron hole
 

When I got my '28 Phaeton in 1965, it was a fully assembled low mileage car (my Grandfathers), complete in every aspect - except for the side curtains. I ran the car for 15 years without side-curtains. Then I found that the LeBaron Bonney Company that produces vintage upholstery (including Model A) would make up a set of side-curtains for my car ('28 Phaeton).

I suspect that they still do. If so, I am sure that they can help you, as they also carry a full line of fasteners and trim hardware for all aspects of upholstery. My SUMMER 2010 catalog has them listed on page 84-87.

Their website is : www.LeBaronBonney.com . Phone number is (800)221-5408. They are located in Amesbury, Massachusetts, USA

Re: 1928 phaeton top iron hole
 

Doug that cool that you put the link on I wish I could figure out how to do that!

Re: 1928 phaeton top iron hole
 

jm29Henry, post #7:
Doug that cool that you put the link on I wish I could figure out how to do that!
---------------------------------------------------------
I will support very strongly that I am one of the most inept and ignorant internet/computer users on this forum. I certainly DO NOT know how to attach anything to any of these posts.

All I did was to type their website address as part of my text, just like I did with their phone number. The esoteric mysteries of the internet/computer are the wizards who need to be thanked. And I thank them daily !

My initial post would have beat you at giving the LeBaron Bonney information, but I did spent some time coming up with the information.

Re: 1928 phaeton top iron hole
 

In the next drawing there is no fastener in the place were I am asking for
Anyone knows Lebaron Bonney part number or the PN from other provider?
Regards