The Ford Barn - Small holes in top inside of open car windshield frame

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Small holes in top inside of open car windshield frame (https://www.fordbarn.com/forum/showthread.php?t=185643)

wrndln

12-28-2015 01:51 PM

Small holes in top inside of open car windshield frame

1 Attachment(s)

I am attaching a picture of the drivers inside top piece of a 30/31 open car windshield frame. There are 2 small holes, as you can see in the picture. I suspect the holes were drilled for something after it was manufactured. Does anyone know if the holes are factory punched, which I suspect were not?
Thanks
Rusty Nelson

Bob C

12-28-2015 02:39 PM

Re: Small holes in top inside of open car windshield frame

Possibly for wiper hose clamps??

Bob

wrndln

12-28-2015 03:27 PM

Re: Small holes in top inside of open car windshield frame

Bob,
I never thought of that. Maybe that is what the holes were for.
Thanks,
Rusty Nelson

MAG	12-28-2015 05:11 PM

Re: Small holes in top inside of open car windshield frame

Bob is correct. Two small clamps hold the vacuum wiper hose in place there.

All times are GMT -5. The time now is 03:46 AM.