The Ford Barn - 1940 Ford cowl assembly

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 1940 Ford cowl assembly (https://www.fordbarn.com/forum/showthread.php?t=181706)

klawockvet

11-01-2015 03:38 PM

1940 Ford cowl assembly

What years will interchange with a 40 cowl vent. I'm bringing a street rod back towards original in many areas. My cowl vent has been welded shut and filled in. Anyone out there with experience in doing the same? I'm thinking that cutting the cowl vent surrounding metal out and replacing it with a functioning vent. I have found some 41 to 48 vents but don't known if they interchange.
Thanks,

swoopNZ

11-01-2015 04:15 PM

Re: 1940 Ford cowl assembly

38-40

JSeery

11-01-2015 05:06 PM

Re: 1940 Ford cowl assembly

That's what I was going to say, I thought the 38s were the same.

tiquer

11-01-2015 09:25 PM

Re: 1940 Ford cowl assembly

I beleive the 40-47 truck is the same as the 40 car

All times are GMT -5. The time now is 02:53 PM.