![]() |
Saw a idiot driving his 30 model a coupe today Saw a idiot driving his highly altered model a today. It was to fast to get a picture before he sped off. The car was fairly original with the exception of the blown Chevy sticking way up thru the frame rails. I know he changed the rear ended I saw that when he sped away but the front end including original wires was still present. The sad part was this looked to be a complete original car that from five feet away was a superb example.. Alway down to the rumble seat ft and back bumpers etc. when he stepped on it the frame flexed so bad the the Drs door flew open . I thought he was going to fall out. I don't know how long it's going to last before he tears the frame in half. It certainly was making the horse power and it really sounded great. The funny part was a policeman was going the opposite direction and he acted like there was no problem when the door threw open. The sad part was the driver was not a young kid but at least a fifty to fifty five plus he should know better. Just a thought on my part.
|
Re: Saw a idiot driving his 30 model a coupe today Old enough to know better, still too young to care. There are worse afflictions to have.
Probably something he wanted to do for a long time, finally had time and money to do it. I hope you caught a bad case of it when he passed by:D |
Re: Saw a idiot driving his 30 model a coupe today It's a affliction had been there done that but no longer have the interest any longer. The sad part was the car was just to nice to screw up and was not done safely at any level. I mean when he sat down on it the car was twisting and it really will not be long before the body and the frame are toast. The scary part is that he probably is going to hurt some one else when I'dt does come apart. But you cannot fault him for living his dream, just live it with everyones safety in mind.
|
Re: Saw a idiot driving his 30 model a coupe today I would hope this was not a Model A wasted to make a ROD... Now if the car was made from parts, that's all fine...
|
Re: Saw a idiot driving his 30 model a coupe today Quote:
I'm afraid I can't agree about not able to fault him for living his dream when he is likely to end his life and that of others in the process. Such behaviour is best left a dream. Such people live amongst us everywhere but we have the right to protect ourselves from them. |
Re: Saw a idiot driving his 30 model a coupe today Quote:
|
Re: Saw a idiot driving his 30 model a coupe today Quote:
Kids today...go figure |
Re: Saw a idiot driving his 30 model a coupe today Sounds like a mere child I'd say. Hope he stays safe. Since I was a teen in the fifties, speed never meant anything to me, but the car had to look great. It was all about the look then and still is.
|
Re: Saw a idiot driving his 30 model a coupe today An HONEST confession is GOOD for the SOUL!
How many of you out there have done SIMILAR escapades? I HAVE! Sometimes I wonder how I lived this LOOOOONG! Willie Wild |
Re: Saw a idiot driving his 30 model a coupe today Been there and done that kind of stuff once, I put a Hemi in a cut down 36 Chev truck cab, roll bar bench seat and beer cage gas tank. Boy we had fun until the police caught up with me and my friends. That was the end of that adventure. All I can say that was good about it is that it was a Chev and not a Model A.
|
Re: Saw a idiot driving his 30 model a coupe today now that hot rod would be a good candidate for that Morrison chassis that was under that other A with the big wing. I don't like good vintage tin messed up. but if someone is going to do it, the right way is best. Built many rods in my time and all of them were safe, with the right equipment etc. might have driven them a bit crazy when I was young, but I wanted protection if something went wrong. Hope that guy doesn't hurt anyone...
|
Re: Saw a idiot driving his 30 model a coupe today Might have just been Float A Motor and a B carb?
|
Re: Saw a idiot driving his 30 model a coupe today Quote:
|
All times are GMT -5. The time now is 07:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.