![]() |
26 T pickup well got the T, and I am a first time T owner (all manuals are on order)...time to commence with some stupid questions...
1.what is this, it isn't connected to anything http://i235.photobucket.com/albums/e...psolys0vz9.jpg 2.can anyone I.D. this distributor..wobbles and is missing rod that goes to the timing advance lever, need to order one http://i235.photobucket.com/albums/e...pswhggq3hc.jpg http://i235.photobucket.com/albums/e...psov1dwlsl.jpg 3. what are these...they were in my parts pile?? http://i235.photobucket.com/albums/e...psfpcr4k6l.jpg thanks!! |
Re: 26 T pickup The bracket on the rear of the cylinder head is likely for a foot throttle accessory.
Can't id the dizzy. Those pans are Model A dust pans for between the motor and frame. |
Re: 26 T pickup Thats an after market distributor, with more than likely a BOSCH #9 head on it (VW's used them). There may or may not be a centrifugal advance inside. At any rate, theres a link of "bell crank" missing, which you may or may not need depending on the above. Look DEEP inside mine... see the spring (yellow?). ws
http://i57.tinypic.com/5lxyxy.jpg http://i59.tinypic.com/2qdmnip.jpg http://i61.tinypic.com/2i9qyd2.jpg http://i60.tinypic.com/25hohvc.jpg |
Re: 26 T pickup ... pretty standard tune up stuff too... ws
http://i58.tinypic.com/10hknyv.jpg http://i60.tinypic.com/1zoubcx.jpg http://i60.tinypic.com/3d73a.jpg |
Re: 26 T pickup can get it to fire and run for a few seconds ...will not stay running(guessing fuel)....that is the same distributor i have...haven't looked inside yet to see if it is mechanical advance....need some windshield parts also
|
All times are GMT -5. The time now is 08:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.