The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   35 radiator removal with grille in place? (https://www.fordbarn.com/forum/showthread.php?t=174047)

B-nut 07-23-2015 03:57 AM

35 radiator removal with grille in place?
 

Have any of you successfully removed the 35 Ford radiator while leaving the grille in place? If the water pumps and generator were off it looks as though it might come out.Thanks

oldbugger 07-23-2015 06:09 AM

Re: 35 radiator removal with grille in place?
 

Yes I have done it but its a pain, I still have to touch up the paint on the fender.

JM 35 Sedan 07-23-2015 06:29 AM

Re: 35 radiator removal with grille in place?
 

Yes, I have removed the radiator with grille in place on my '35 Fordor after removing generator, water pumps and distributor. The last step required "gently" pulling/prying up on top of grille enough to allow top of radiator to come back so it could be lifted out. I found this to be less work than completely removing the grille and then trying to put it back in and line every thing up again. Patience and care are your friends.

Talkwrench 07-23-2015 06:43 AM

Re: 35 radiator removal with grille in place?
 

Such a fun job! :rolleyes:

Kerk 07-23-2015 07:09 AM

Re: 35 radiator removal with grille in place?
 

I suggest you tape a piece of sheet metal to engine side to prevent damage. I carry a piece in case I have to remove the distributor. Can store under floor mat. jmo kx


All times are GMT -5. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.