6 volt fog light bulb removal
 

How do you remove a 6 volt light bulb from "sun coast classics" fog lamp?

Re: 6 volt fog light bulb removal
 

You will need to post pictures to get the best results ----I don't know what a "sun coast classic" fog lamp looks like and it doesn't come up on google, many have a screw on the bottom, some on the center back, but some just snap together---is it a pre-focus bulb with 3 little pins that engage into slots in the base flange of the bulb----or is it a small "seal beam"

Re: 6 volt fog light bulb removal
 

I will post pictures as soon as I figure out how on here and I believe it is a sealed beam

Re: 6 volt fog light bulb removal
 

[IMG]http://jpg[/IMG

Re: 6 volt fog light bulb removal
 

Re: 6 volt fog light bulb removal
 

I once had a G.E. bulb removal kit, in a tin box. It contained short pieces of surgical tubing, in various sizes. Have you ever had a bulb go "CRUNCH" in your fingers?--+*#^%$%^^!!!---Gregg once hit my OLD, CHEEP, BRITTLE, Massey Ferguson hard hat, with a Dead Blow Hammer, it TOTALLY SHATTERED, now you know why I tipe FUNNY!
W. Bill
Bill W.???

Re: 6 volt fog light bulb removal
 

The pictures don't show any screws, but they also don't show all the surface --if there are no screws it either snaps off, or has a push and turn, once the rim is off usually the seal beam is held to the rim with bent wire spring clips ---look close, use plastic trim wedge and try some prying ----keep the post active, add more pictures---some of the whole car to generate interest

Re: 6 volt fog light bulb removal
 

Re: 6 volt fog light bulb removal
 

Re: 6 volt fog light bulb removal
 

Looks like a "H3" bulb. Take put the little screw, if it is a H3 bulb it will have a square corner notch on one side, semicircle notch on the other

Re: 6 volt fog light bulb removal
 

[/B]Kurt sure knows his stuff ! Wayne

Re: 6 volt fog light bulb removal
 

This is a "typical" exploded view.

Re: 6 volt fog light bulb removal
 

Thanks you all were a BIG help I will let you know if I get it :D

Re: 6 volt fog light bulb removal
 

http://jpg
When buying this bulb is it one component as shown or is it just the bulb which is soldered to the small wires

Re: 6 volt fog light bulb removal
 

the bulb will come with a pigtail with a male spade connecter ---like the section of whitewire on your bulb


it looks like the terminal was cut off and connected directly ----if you put a connecter on the car part of the wire it will be easy to change next time

I searched some---

http://www.candlepowerforums.com/vb/...cons/icon1.png Re: 6 volt H3 bulbs

I have seen those in the bulb area of the flashlights in sporting goods of walmart. They look like regular h3 bulbs but are 6 volts.

Re: 6 volt fog light bulb removal
 

$6 @ Amazon

Re: 6 volt fog light bulb removal
 

If you are using stock electric system look for 35 watt, if you have alternator, larger gauge wires, 55watt headlights and 55 watt fog carry a spare belt

Re: 6 volt fog light bulb removal
 

It's harder to find the h3's that are 6 volt and not 12 volt.