The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   28-29 Tudor Rear Fender Welting... (https://www.fordbarn.com/forum/showthread.php?t=172633)

Steve Plucker 07-04-2015 01:50 PM

28-29 Tudor Rear Fender Welting...
 

On a 28-29 Tudor, just how far to the back does the rear fender welting go?

Does it end at the curvature of the fender OR does it continue stright down to the bottom of the fender and body?

Thanks.

Pluck

hazelhoff 07-04-2015 02:56 PM

Re: 28-29 Tudor Rear Fender Welting...
 

Hi Steve , on my 29 tudor it goes straight down. Please instruct me when i am wrong about this.

Henk

Mitch//pa 07-04-2015 03:47 PM

Re: 28-29 Tudor Rear Fender Welting...
 

Pluck I am not sure what is right but on my 30 Tudor the gap gets larger at the bottom section of the body so because of that I cut it off just above the opening where the fender curvature ends. It would not hold tight because of that gap.. I have not studied a 29 so I am not sure if they are the same

wrndln 07-04-2015 04:05 PM

Re: 28-29 Tudor Rear Fender Welting...
 

1 Attachment(s)
Phaetons and tudors are the same in this area. Pasted in below is a picture I took of Dave Lopes 28 phaeton at French Lick in 2010. The welting goes clear to the bottom of the rear body crossmember.
Rusty Nelson

Gary Karr 07-04-2015 09:51 PM

Re: 28-29 Tudor Rear Fender Welting...
 

2 Attachment(s)
Here are a couple of additional pictures.

Steve Plucker 07-04-2015 09:52 PM

Re: 28-29 Tudor Rear Fender Welting...
 

Thanks Gary...That answers that question.

Pluck


All times are GMT -5. The time now is 03:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.