The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   changing u joint-47 ford sedan (https://www.fordbarn.com/forum/showthread.php?t=171769)

f1builder 06-23-2015 10:02 AM
changing u joint-47 ford sedan
 

i have to change my u-joint on the 47 tudor and i haven't done this before. can someone give me kind of a step by step process? my mechanic isn't around for a while and i need to know if its something i can handle. thanks loads....george in south dakota.

ford38v8 06-23-2015 12:07 PM
Re: changing u joint-47 ford sedan
 

Front floormat & tranny cover out> Speedo cable disconnect> Frame up on four jack stands> Rear wheels off> Rear brakes, including parking cable off at torque tube> Rear shocks free> Clamshell off> Banjo up on floor jack> Spring mount disconnect> Roll driveline assembly out with floor jack 6" only> Remove U joint. Reverse the procedure and bleed the brakes.

First and foremost, What symptoms are you having that tell you you need to change your U joint?

George/Maine 06-23-2015 01:58 PM
Re: changing u joint-47 ford sedan
 

I can see I have some work ahead of me.
I knocked a tooth out of 1 st gear on my 47 car trans change time.

f1builder 06-23-2015 02:52 PM
Re: changing u joint-47 ford sedan
 

Quote:
Originally Posted by ford38v8 (Post 1108186)
Front floormat & tranny cover out> Speedo cable disconnect> Frame up on four jack stands> Rear wheels off> Rear brakes, including parking cable off at torque tube> Rear shocks free> Clamshell off> Banjo up on floor jack> Spring mount disconnect> Roll driveline assembly out with floor jack 6" only> Remove U joint. Reverse the procedure and bleed the brakes.

First and foremost, What symptoms are you having that tell you you need to change your U joint?
i don't know for sure but figured it was the ujoint. it is making an unusual noise especially when turning or starting out. it sounds like directly underneath the seat area. i will take it for a spin again and try to be more specific after i get done with my chores.

thanks a lot for the info.

george

Steves46 06-23-2015 05:55 PM
Re: changing u joint-47 ford sedan
 

If you haven't done so already you may want to shoot some grease in the u-joint and see if that helps.

f1builder 06-23-2015 07:24 PM
Re: changing u joint-47 ford sedan
 

i took it out for a spin this afternoon, drove about 20 miles and didn't hear the noise. will grease it up just to be sure. don't know what was going on, just the old ford syndrome i guess. plus i am trying to do my shake down cruise before i do a real road trip. thanks guys.....

Old Henry 06-23-2015 10:10 PM
Re: changing u joint-47 ford sedan
 

Just in case you decide to replace the U-joint. Here are the detailed instructions for removing the rear axle which is what is necessary to replace the U-joint:

http://i1059.photobucket.com/albums/...xleRemoval.jpg

f1builder 06-23-2015 10:44 PM
Re: changing u joint-47 ford sedan
 

thank you old henry.....this is great. problem is i can't print it out like it is formatted. can i trouble you to email it to me? [email protected]

thanks a bunch.
george


All times are GMT -5. The time now is 07:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.