The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Water inlet (https://www.fordbarn.com/forum/showthread.php?t=166861)

Redbird 04-20-2015 04:45 PM

Water inlet
 

Does anyone sell the water inlet on the driver's side of the block? Mine is a little corroded and I thought I would replace it while I am having the radiator rodded out. I don't see one in the two parts book that I have.

colin1928 04-20-2015 04:55 PM

Re: Water inlet
 

I believe they all sell inlets I have brought them Synders Macs and Berts in the past

CarlG 04-20-2015 05:49 PM

Re: Water inlet
 

The only ones I see that the vendors are listing now is the cast aluminum one with the extra heater boss on them.

I've seen the original used cast iron ones show up on eBay from time to time. Those may not be any better than the one you already have, it's a crap shoot!

Redbird 04-20-2015 06:21 PM

Re: Water inlet
 

The ones in the Berts book look like the water outlet up by the water pump to me. Doesn't the water inlet have a round hole gasket like in the Bert's book? They are closed today or I would call them.

CarlG 04-20-2015 06:26 PM

Re: Water inlet
 

The water inlet is the one on the left side of the engine. I didn't see one on Bert's on line catalog, but they may have a good used one if they don't have new ones.

SteveB31 04-20-2015 06:27 PM

Re: Water inlet
 

We do have good original ones for $10

Steve Becker
Berts Model A Center

MAG 04-20-2015 08:48 PM

Re: Water inlet
 

Original Water Inlet - This is a original part. Will require cleaning and painting. P/n 12110 Bratton's 1-800-255-1929

Mitch//pa 04-20-2015 09:36 PM

Re: Water inlet
 

can yours be blasted and painted? youll probably have to do that to any of the used ones you acquire.

Redbird 04-21-2015 06:57 AM

Re: Water inlet
 

Steve, sent you a PM. Need the gasket to.

John F

hardtimes 04-21-2015 12:06 PM

Re: Water inlet
 

Quote:

Originally Posted by Redbird (Post 1072847)
Steve, sent you a PM. Need the gasket to.

John F

Hey John,
You done good and get good parts and service form Steve and company :) !
And, as with your water inlet need/request, you will find most any part that you could need with Berts. I like that Steve will go into the original parts pile to get you something that is not re-popped these days. All of the original parts that I've gotten from Berts FIT TOO :)


All times are GMT -5. The time now is 03:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.