Looking for oversize chrome number plate frame
 

I'm running a year of manufacturer plate 1931 MASS and it measures 141/4 X 61/2 its a little worn but I don't want to paint it. A chrome trim would clean it up nicely but I can not find this size, any ideas?

Re: Looking for oversize chrome number plate frame
 

I'd like one, too.

Re: Looking for oversize chrome number plate frame
 

I thought I saw an adjustable frame on the swap section but can't remember if the A or EV8 site, maybe a week or so ago.
Paul in CT

Re: Looking for oversize chrome number plate frame
 

I have one that doesn't seem to fit anything I or my friends have. I'll measure it when I get home later this afternoon.

Re: Looking for oversize chrome number plate frame
 

Actually checked mine, just black and very likely and original part (not the best job smoothing out the rust pits...)

https://www.fordbarn.com/forum/pictur...ictureid=30519

Re: Looking for oversize chrome number plate frame
 

I like the COD plate

Re: Looking for oversize chrome number plate frame
 

Sacramento Vintage Ford has them. Either with square or rounded corners.
Say, "THANKK YOU BILL"
Bill W.

Re: Looking for oversize chrome number plate frame
 

Anyone know if one is made for a 1929 WI plate?
It is 14 1/2" x 5"

Re: Looking for oversize chrome number plate frame
 

If you cannot find the specific size you need, consider having them waterjetted out of stainless and polishing them.

Re: Looking for oversize chrome number plate frame
 

Sacramento Vintage has the large frames for 14" X 6" plates. I got them for my '30 CA plates.

https://farm6.staticflickr.com/5559/...d6a863dc61.jpg

Ooops, sorry Bill. I see you already said that.

Re: Looking for oversize chrome number plate frame
 

This one won't fit my plate, but if it will fit yours, PM me for a deal!

00739 Sacramento Vintage Ford

LICENSE PLATE FRAME- early square style

Original style chrome frame with squared corners for the early license plates. Measures 6 inches X 14 inches. Holes are 5-1/8 inch center to center (top to bottom) and 7-3/4 inch center to center (left to right). Chrome plated. Sold each. 21A P.193, V8 P.150 $17.95

Re: Looking for oversize chrome number plate frame
 

or could get really crafty with the chrome self stick door edging for modern vehicles... slip it around the edge of the license plate - might work.

Re: Looking for oversize chrome number plate frame
 

That's OK, Bro,
Repetition is the MOTHER uf LURNIN' & the FATHER uf BOREDOM!
I'm paranoid, humor's scarce, lately & the Dog:cool: jist LAFFED???
Bill W.

Re: Looking for oversize chrome number plate frame
 

Okay I called Sacramento Vintage Ford and they actually took a plate frame out of stock and measured it for me. I think the OD might fit around the plate but the mounting holes are in the wrong place. Mine are about 91/2" on center theirs 71/2".

Re: Looking for oversize chrome number plate frame
 

I just didn't read the "fine print" before I bought one. Doesn't seem to fit anything I've tried so far: Texas, North Dakota, & Kansas. I have one more in our club to try: Wisconsin. They must have made them to fit California only.

Re: Looking for oversize chrome number plate frame
 

There is a vintage adjustable frame on e-pay http://www.ebay.com/itm/Vintage-Orig...item1c4f50d781

Or you may contact one of the License plate restorers. They may have or know where to get the proper size.