Overdrive cable connection
 

I know where the overdrive cable connects to the transmission, but where is the correct position for the bracket and handle in a 53 Customline? I picture would be helpful.

Thanks,
Kevin

Re: Overdrive cable connection
 

All that I have seen, including a '55 Ford, the bracket fastens on with the top bolt on the solenoid.

Re: Overdrive cable connection
 

This what you looking for? https://www.google.com/url?sa=i&rct=...15798552311986

Re: Overdrive cable connection
 

On my 53 victoria the T handlr is next to the steering column on the right hand side.

Re: Overdrive cable connection
 

On my Merc there is an oval hole with rubber sleeve in the firewall, probably about inline with the exhaust on the driver's side.. The handle for the cable is directly in back of that so there are few bends in the cable.

Re: Overdrive cable connection
 

Just what I was looking for! Thank you itsa52!

Re: Overdrive cable connection
 

Re: Overdrive cable connection
 

Looks like I misunderstood the question, I should pay attention to what I am reading.

Re: Overdrive cable connection
 

I am always getting in trouble for not reading the last paragraph. Must be an age thing...lol

Re: Overdrive cable connection
 

Don't forget about the bracket held by a bell housing bolt. On the firewall as mentioned there is an oval "knock out" for the cable to go through, but I just drilled a hole in the middle of the oval rather than having a much larger hole. Also a small "knock out"
for the kick down switch located under the accelerater pedal. Charles