The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   68C door sills (https://www.fordbarn.com/forum/showthread.php?t=152288)

Farmer j 10-17-2014 07:51 AM

68C door sills
 

i am restoring a 1931 68C. Any one have a picture of the door sills installed on the car? I don't know which side goes out. My car may not have been repaired correctly, the new sills I have don't seem to fit. Thanks

Kevin in NJ 10-17-2014 10:28 AM

Re: 68C door sills
 

Are you talking about the aluminum piece that covers the wood sill?

The reproductions are made to the Ford print. The wood sills, well not so much.

Pictures would be helpful, but in the end so creative work and comparison to the factory photos.

If you email to my regular email address I may be able to help with other pictures.
My regular email is in my website at the link below.

Farmer j 10-17-2014 08:12 PM

Re: 68C door sills
 

Kevin, I have the aluminum sills. The wood that has been put down in that area by the previous owner doesn't appear right. Thus I need pics of what that area is supposed to look like. Your link gives me a blank page. Jerry

Kevin in NJ 10-17-2014 10:38 PM

Re: 68C door sills
 

3 Attachment(s)
Here are some pictures from what I believe to be an original sill.
Does this help or do you need more?
[email protected] is my email address

31Abone 10-18-2014 10:33 AM

Re: 68C door sills
 

I have a new set from Snyders that I do not need ? bought by mistake,anyone need them ? sc Big Pine ca

Farmer j 10-18-2014 01:47 PM

Re: 68C door sills
 

Thanks Kevin. I didn't realize they went on the edge! Jerry


All times are GMT -5. The time now is 06:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.