windshield swing hardare
 

Hi All,

When I have the windshield out, it starts to vibrate and very annoying. I isolated it down to where the screw goes through adj. arm into the windshield frame. I would like to put a lock washer there is possible. Does anyone have a listing of the hardware that goes there? Or know where I can get one.


Thanks,

Mike

Re: windshield swing hardare
 

Thin wave washers work well there & are almost invisible.
Bill W.

Re: windshield swing hardare
 

Hi Mike...........let us know how you make out. I have the same issues and bought the parts and pieces and they did not work. In my case the wooden header is shot and the windshield frame screws are loose. One day I will do a band aide repair but a new header is probably in order and no small task.

Re: windshield swing hardare
 

a pix of the hardware is at http://www.snydersantiqueauto.com/3380

Here too I guess...

http://www.snydersantiqueauto.com/up...5475S-7692.jpg

Maybe doubling up those washers?

Joe K

Re: windshield swing hardare
 

A friend had a questionable wood header, at the top of the windshield, he injected Foaming Gorilla Glue into the screw holes with a syringe & drove in common SCREW NAILS & it stayed tight & didn't RATTLE.
Bill W.