35 3 Window on Rotisserie
 

Hi Fellas,
The weather down in OZ has been a little better lately, and I have had a chance to put the 35 3 Window on a Rotisserie.
I have Por-15 the entire inside, and also where the body sits on the chassis.
The Original floor is in great condition. If anyone wants any detailed pictures, please PM me.
Here is a picture of it sitting on it,s side.
Pete from OZ.

http://i1283.photobucket.com/albums/...psbb5d7a78.jpg

Re: 35 3 Window on Rotisserie
 

That is really nice!
How much weight will it handle?

Re: 35 3 Window on Rotisserie
 

Thanks 47 COE,
Rotisserie has Capacity of 2000lbs.
Pete from OZ

Re: 35 3 Window on Rotisserie
 

Are those floor pans original or new? Nice!

Re: 35 3 Window on Rotisserie
 

Hi Shadetree,
Yes Sir - The Floor is Original in Great condition.
The 35 lived it,s life in Oklahoma, and now down in Australia.

Pete from OZ

Re: 35 3 Window on Rotisserie
 

Looks great - surprised your battery floor opening is so small - here's my 3 Window in a similar pose - note the battery tray opening:confused:

Re: 35 3 Window on Rotisserie
 

Looks the same as yours to me, except that his has a cover in place. What am I missing? DD

https://www.fordbarn.com/forum/attach...0&d=1411508357

Re: 35 3 Window on Rotisserie
 

Ah got it! - I was looking at the smaller square opening on the other side -

Re: 35 3 Window on Rotisserie
 

Let me guess......that smaller square opening is for access to his master cylinder. Remember, now in Australia.....they drive on the goofy side over there. What do I know? DD

Re: 35 3 Window on Rotisserie
 

V8COOPMAN - You have it right . Master cylinder hole.

PeterC - Your floors look excellent. Mine is a January build 35, and there seems to be 2 more seat brackets as compared to your picture.
Pete from OZ

Re: 35 3 Window on Rotisserie
 

Mine is April build date

Re: 35 3 Window on Rotisserie
 

Por-15. I wish people would stop using that stuff. It ruins an otherwise nice restoration. Por -15 is for sealing up rusty crappy areas when you are patching a rust hole in a 1985 Honda.
Those floors are beautiful, no need for por-15. Por -15 is permanent, non-original,a very poor appearing finish and looks sloppy no matter how hard one tries to make it nice.
Nice car by the way! very nice metal! Did you sand or bead blast the underside?

Re: 35 3 Window on Rotisserie
 

What else would you put on? High end paint that will get ruined by road debris?

I prefer brush-on Rustoleum and heresy.

OP-Nice car!

Re: 35 3 Window on Rotisserie
 

Powder Coat the whole damn thing and never worry again.
PS beautiful car. Oklahoma's net worth has been diminished.