Where to get upholstrey board,door panel
 

Its kind of hard to get upholstery backing board local,some say use plywood from hardware store but ? not so good ? something water won't warp ?

Re: Where to get upholstrey board,door panel
 

I've used masonite before with good results.

Re: Where to get upholstrey board,door panel
 

I buy the material from a local custom top and upholstery shop. It is not expensive.

Gar Williams

Re: Where to get upholstrey board,door panel
 

You will want to use a good quality waterproof panel board. If you don't have an upholstery supply in your area, you should be able to order it from Lebaron Bonney.

Re: Where to get upholstrey board,door panel
 

Several auto/boat upholstery shops here in the Twin Cities carry the upholstery board. You could look in the yellow pages for auto upholstery shops in your town and I am pretty sure they would have some at a decent price.
Rusty Nelson

Re: Where to get upholstrey board,door panel
 

Here in the UK it is known as Union Board and comes in 4 FT by 3 FT sheets 1/8" thick . It is grey in colour and fairly dense . It does look water resistant enough to do the job . Maybe it has the same name in USA.

John in sunny Suffolk County England.

Re: Where to get upholstrey board,door panel
 

Many shops are now using ABS sheet stock, flexible, absolutely water proof. Available at most building supply stores.

Re: Where to get upholstrey board,door panel
 

Macs sell the entire precut panel set. I purchased a set for my Tudor 2 years ago and was very happy with it.