![]() |
another flathead starts up This is the start up a couple of days ago of the 304 I built 6 months ago. Has one of Pete's 425 potvin cams.
http://i120.photobucket.com/albums/o...ps39beef94.jpg |
Re: another flathead starts up Awesome!!
|
Re: another flathead starts up Sounds Good. That's a lot of work to get it to that point. Looking forward to see more of it.
|
Re: another flathead starts up Doug-F1 if you are going to the Gimli Beach cruise in July stop by the booth and say Hi.
|
Re: another flathead starts up Feels / sounds great on that first fire up!!! Especially with open pipes!
Tony |
Re: another flathead starts up NEVER allow a new engine build to idle at slow RPM.
|
Re: another flathead starts up I seem to recall that with a cam as aggressive as a 425, that the engine should never be idled low, even after the engine is all bedded in. Higher idle throws more oil at the camshaft and lifters. Can't remember where I heard it, but seems to make sence.
What's your thoughts on this John? Would running the late Merc rods with the oil hole directed towards the cam help here? Would this allow the idle to be bought down? I'm talking about an engine that's already been bedded in or run in or whatever it's called over there. Martin. |
Re: another flathead starts up Wow! That sounds as hot as a whorehouse on dollar night!
|
Re: another flathead starts up The vid is the only time engine has been run. Owner has already been advised to not run again until ready for complete break in.
|
Re: another flathead starts up Broken in, was the phrase I was looking for, thanks.
Martin. |
Re: another flathead starts up What rpm should the idle be set at on this engine???
|
Re: another flathead starts up Sounds great
|
Re: another flathead starts up 4tford, no I'm unable to make Gimli Beach cruise this year. If you could find the time when you get there have a Cold beverage for me.
|
Re: another flathead starts up will do that for sure. Steak and lobster night.
|
Re: another flathead starts up Pretty cool.
|
All times are GMT -5. The time now is 01:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.