What are these two holes in front of floor board
 

The photo shows the top of two steel bolts that go thru the chassis wood to the frame and a rough looking "kick panel retaining clip" (which will be replaced) but were the two holes at the top of the photo used for.

Re: What are these two holes in front of floor board
 

Screws held the wooden body blocks in place here while the body was lowered onto the chassis.
Marshall

Re: What are these two holes in front of floor board
 

Thank you Marshall. At this time there is new chassis wood under this position. We replaced all the wood from stem to stern last summer. So, we'll put screws in place here.

Re: What are these two holes in front of floor board
 

Be sure that they are slot head screws and not Phillips screws! Phillips screws are a big no-no in Model A's.
Marshall

Re: What are these two holes in front of floor board
 

Got that Marshall. We special ordered slot heads when we installed the wood kits, thanks.