front tool box
 

Last week I saw a toolbox on the front of an A that simple a big square box that had to be something 18x12x12. I have seen the little ones in the catalogs but I would like to find this big one. I don't know is the owner made it or whether it is available somewhere.

Anyone have any idea?

Re: front tool box
 

Bratton's.....17-1/2" x 12" x 12"....$166.00

Re: front tool box
 

That's basically it.... but .....Not available

Re: front tool box
 

The man that made those square tool boxes that you were referring to, quit making them a couple years ago.

Big, easy to install, but USA made. He made a big run of them, but it took him several years to sell them all, and he didnt make any money off of the deal, so he quit.

Re: front tool box
 

Mikes has the the smaller curved ones

Re: front tool box
 

I have one and am very pleased with it. Millard did a great job designing and modifying the boxes so they are just what I wanted. The later ones were powder coated and had the lock on the side. Some of the earlier ones did not have mounting points to clear a stone guard. We took measurement from mine and fixed that.


there is also a rounded type of box out there. It looks great but doesn't hold as much as the box version.

Re: front tool box
 

Mine is just a steel box that was used for a circular saw. I got the base that it sits on from Berts I think.

Sewall Tyler

Re: front tool box
 

Did this one for $20 using some 1/4" X 2-1/2" strap and an old Craftsman tool box.

Re: front tool box
 

Not exactly 1920-30's ....but I like it. :D

I may go this way. I have a slightly bigger toolbox.

Re: front tool box
 

It is important to note that the 'Big' box covers the crank hole and does not allow for hand cranking. The smaller 'Craftsman' tool box (Denis4X4 post above) does allow for the use of a hand crank, but you may have to modify the crank handle to add length to get over the tool box.

The 'Big' box is listed on page 94 of Bert's Model A Center catalog - $190.
The 'Big' box is listed on page 295 of Sacramento Vintage Ford catalog. $245.

If unavailable, you might try contacting Alan Bennett : Ph: (818) 222-4432
or - Roger Sandmeier : Ph: (775) 782-3903
These guys made these type of boxes several years ago and may still have one 'kicking around'.

Re: front tool box
 

We have a Clubber who mounted two wooden arms on the sides of his tool box and sat it across the bumper arms. Looks good to me.

Re: front tool box
 

we have a new box in the works, will keep you posted, if interested pm us,we are only going to run 12 for a start hope to keep the cost around 150.00-160.00.

Re: front tool box
 

Re: front tool box
 

mrtexas

Will your box fit a 31 ?

Re: front tool box
 

user growley bear has an incredible box that as i recall he made. Its awesome rolls down with the fenders in front, really looks like it belongs there, like part of the car. would love to have one just like it haha

Re: front tool box
 

There is a local guy that makes small ones that hang on the radiator supports. Just to hold a few wrenches and things. I like them a lot, but no picture. I can try and get a picture next weekend at the car show. He doesn't sell them though, you have to win them or be a member in their club I think.