The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   "New Stewert Werner stop light" (https://www.fordbarn.com/forum/showthread.php?t=132034)

Outsider 02-20-2014 03:37 AM

"New Stewert Werner stop light"
 

Trying to find any information on this little jewel. It was made in 1928 and was to be mounted in the rear window. Neon tube says "STOP" and illuminates red/orange. This was handed down to me from my dad who got it from my mothers dad in the mid 70's. Original box with instructions. The only info I can glean from the inter webs are a few original adds, an old listing from eBay and photos that my dad posted years ago looking for information and possibly a value. I'm not interested in selling as this is all I have from grandad.

A google image search will show the photos my father posted. Other than some cracking of wire insulation, it is in new condition and it works, never installed.

Any help would be appreciated.

Outsider 02-20-2014 03:41 AM

Re: "New Stewert Werner stop light"
 

1 Attachment(s)
Photo

Steve Sturim 02-20-2014 07:38 AM

Re: "New Stewert Werner stop light"
 

It is in the Model A Ford Unauthorized Accessory book. My Dad and I have the same light NOS also.

Ron/IA 02-20-2014 08:47 AM

Re: "New Stewert Werner stop light"
 

Outsider - What a unique accessory! I would love to have one in my rear window.

I wonder if a vendor would be interested in making a replica, but instead of using a neon tube; LEDs or incandescent could be used.

I really like the shape, and the fact it glows the word "STOP".

super flat 02-20-2014 11:44 AM

Re: "New Stewert Werner stop light"
 

WOW is that COOL I would love to have one!

jm29henry 02-21-2014 09:29 AM

Re: "New Stewert Werner stop light"
 

2 Attachment(s)
that is so cool, I love old authentic automotive accessories . I have a whimsical traffic cop stop signal that puts out his arms when you hit the brakes. I posted a couple of pictures.

mass A man 02-21-2014 11:10 AM

Re: "New Stewert Werner stop light"
 

What makes this unique is that it's NEON. Neon needs about 7,500 volts (minimum) to light them up. That explains the ignition coil in the photo. I've not seen this before, thanks for posting!

Tom Wesenberg 02-21-2014 11:49 AM

Re: "New Stewert Werner stop light"
 

That is a neat accessory that I've never seen before.
Now I'll have to look up neon to see when it was invented.

Jim Boehmke 02-21-2014 12:53 PM

Re: "New Stewert Werner stop light"
 

2 Attachment(s)
on my '31 coupe I use 3 stop lights to make sure the guy in back sees me braking. One in the back window is probably the best since it's high up in the guys face. These 2 were quite easy to find in a one month period on ebay. The one on the license plate was nos at $60. the one in the window was $40.

160B 02-21-2014 01:43 PM

Re: "New Stewert Werner stop light"
 

This is the stop light accessory on my 1931 160B

https://www.fordbarn.com/forum/pictur...ictureid=25766

https://www.fordbarn.com/forum/pictur...ictureid=25763

https://www.fordbarn.com/forum/pictur...ictureid=25767

jm29henry 02-21-2014 03:08 PM

Re: "New Stewert Werner stop light"
 

We do it right because we do it twice

Mike V. Florida 02-21-2014 03:37 PM

Re: "New Stewert Werner stop light"
 

Neon! Cool!!!

Outsider 02-21-2014 07:02 PM

Re: "New Stewert Werner stop light"
 

Thank you all for the replies, the thing is amazing and sits in its box on display in my living room. Great conversation starter.
Would anyone here know the possible value on it? My dad was offered $1,000.00
For it in the mid 80's and turned it down. Glad he did.

CarlG 02-21-2014 08:13 PM

Re: "New Stewert Werner stop light"
 

30 years depreciation should make it about $10 :D

Spokes 02-21-2014 08:31 PM

Re: "New Stewert Werner stop light"
 

Very Neat, If you can post a pix of it lighted !!!

crumbaa 02-21-2014 08:34 PM

Re: "New Stewert Werner stop light"
 

OH that is really cool. I am going to put a stop light on mine and this would be great. Anyone know of repo?

bikejunk 02-21-2014 09:11 PM

Re: "New Stewert Werner stop light"
 

just the neet -o- est stop light ever but a G was a lot of dough in the 80's

Tom Wesenberg 02-22-2014 12:00 AM

Re: "New Stewert Werner stop light"
 

I did a Goggle search on neon and found this:

Georges Claude - Inventor of the First Neon Lamp

The word neon comes from the Greek "neos," meaning "the new gas." Neon gas was discovered by William Ramsey and M. W. Travers in 1898 in London. Neon is a rare gaseous element present in the atmosphere to the extent of 1 part in 65,000 of air. It is obtained by liquefaction of air and separated from the other gases by fractional distillation.

The French engineer, chemist, and inventor Georges Claude (b. Sept. 24, 1870, d. May 23, 1960), was the first person to apply an electrical discharge to a sealed tube of neon gas (circa 1902) to create a lamp. Georges Claude displayed the first neon lamp to the public on December 11, 1910, in Paris.
Georges Claude patented the neon lighting tube on Jan. 19th, 1915 - U.S. Patent 1,125,476.
In 1923, Georges Claude and his French company Claude Neon, introduced neon gas signs to the United States, by selling two to a Packard car dealership in Los Angeles. Earle C. Anthony purchased the two signs reading "Packard" for $24,000. Neon lighting quickly became a popular fixture in outdoor advertising. Visible even in daylight, people would stop and stare at the first neon signs dubbed "liquid fire."

Outsider 02-22-2014 12:23 AM

Re: "New Stewert Werner stop light"
 

Unfortunately the insulation on one of the wires is cracked where it intersects with the housing so more than likely if I put power to it it would esplode on me...don't want to do that. I haven't even seen it lit up. I figure when I finally get around to building a T, I'll make the necessary repairs.

Tom Wesenberg 02-22-2014 02:24 AM

Re: "New Stewert Werner stop light"
 

Quote:

Originally Posted by Outsider (Post 828290)
Unfortunately the insulation on one of the wires is cracked where it intersects with the housing so more than likely if I put power to it it would esplode on me...don't want to do that. I haven't even seen it lit up. I figure when I finally get around to building a T, I'll make the necessary repairs.

Liquid tape does a great job for such repairs. :)

I don't see a vibrator, but maybe it's inside the can with the coil (transformer). It should have a vibrator to change the DC to a pulsing current to make the transformer work. Also does the neon have black over the parts of the tube between the letters?


All times are GMT -5. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.