The Ford Barn - 1932 ignition switch lever.

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 1932 ignition switch lever. (https://www.fordbarn.com/forum/showthread.php?t=118051)

Curt Cummings

09-21-2013 08:28 PM

1932 ignition switch lever.

Hi all, I am working on my 32 coloumb drop and ignition switch assemeby that is totally froze up. Also the switch lever is broken off and I can't find a replacement listed in any of the parts books. Is there a replacement available? I can find the on/off plate and a tumbler and key but not the switch lever. I have a 37 columb drop with switch lever in tact but don't know if it will exchange into a 32 switch. Any suggestions and help will be greatly appreciated. Thanks in advance. Curt

deuce lover

09-21-2013 09:09 PM

Re: 1932 ignition switch lever.

There is someone making them and sells them on EBAY for $50.
There is one now listed as a buy it now .EBAY # 271276978091.

uncle buck

09-22-2013 08:19 AM

Re: 1932 ignition switch lever.

Curt, check out this thread.
http://fordbarn.com/forum/showthread.php?t=70177

Curt Cummings

09-22-2013 11:26 AM

Re: 1932 ignition switch lever.

Deuce lover, Thanks for the tip. I got the one offered on E-Bay so will see how it fits and post the information ASAP. It looks good in the photo but we will weight and see. I also appreciate the tip on the thread from uncle buck. That was good information and I will also keep it and pass it on to another friend currently building a 32 two door.

All times are GMT -5. The time now is 05:51 AM.