The Ford Barn - Floorboard seal

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Floorboard seal (https://www.fordbarn.com/forum/showthread.php?t=116350)

Mike V. Florida

09-02-2013 07:20 PM

Floorboard seal

1 Attachment(s)

Where does it attach?

Tom Wesenberg

09-02-2013 07:47 PM

Re: Floorboard seal

My early 29 Tudor has the fabric on 3 sides, not the side which meets the other board. It's not cut at the corners, but just folded making a 45* thick lap on the bottom side. Short pieces on the short edge by the pedals. Nothing at D and H. Tacked on sides and bottom.

w.michael

09-02-2013 10:10 PM

Re: Floorboard seal

I just had the original floorboards out of my '31 today. There are remnants of fabric and tacks at A,B,C,E,F,and G. None at D and H. That is, fabric was on three edges of each board, but not on the edges where the two boards meet.

W. Michael

700rpm

09-02-2013 10:55 PM

Re: Floorboard seal

The originals on my 29 Tudor were as described above. I have seen other originals and that seems to be the standard installation.

Mike V. Florida

09-03-2013 10:05 AM

Re: Floorboard seal

Great, Thanks guys!!!!

All times are GMT -5. The time now is 05:23 PM.