![]() |
Alternative brake light switch Anybody know of a modern brake light switch that can be used on a 31 A? The repo's that I have doesn't seem to work.
|
Re: Alternative brake light switch try A & L parts ....he has one that works like the original..check the vendors section..good luck
|
Re: Alternative brake light switch I'll second A & L. They don't have a web site but their phone
number is 860-693-0112. Bob |
Re: Alternative brake light switch Remember those spring loaded, arm type switches used under the floorboards on old Chevys. The arm just goes above the brake pedal. Somebody? maybe Mac's, listed them in their hot rod section. Bill W.
(The existing wires should reach O.K. & it just screws to the bottom of the floorboard with 2 wood screws. The switch arm "might" have to be bent a little, but it bends easy, without breaking! I know a man that put one for his clutch pedal to operate a little buzzer, so he "knew" when he was ridin' the clutch!) |
Re: Alternative brake light switch The A & L one has a bronze bushing, so it does not stick or bind.........it works the best of any repro............
|
Re: Alternative brake light switch |
Re: Alternative brake light switch Go to a NAPA store and ask to see their catalog with brake light switches.
There are a whole lot of switches to check out. JB |
Re: Alternative brake light switch Do a search . A lot of info . I put a 29 switch on my 31 s/w . The 31 repro. I bought was junk . 31 switch caused me a lot of grief .
|
Re: Alternative brake light switch Catterpiller fork lift has A stop light switch that would work, in fact it Is the same switch that is used on a 49 to 54 chev. Maybe others.
|
Re: Alternative brake light switch Here's the PDF for A&L Parts,
http://www.scvcma.org/documents/bull...talog-2012.pdf |
All times are GMT -5. The time now is 03:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.