1931 S/W Fordor Sedan Dome Light Wiring Our 1931 S/W Fordor has a wood block above the rear window for a Dome Light. (The car was disassembled by the previous owner.) Please help with the following:
1) Does the Repro Dome Light get mounted flush to the wood block with screws from the inside of the light? 2) Does an On/Off Switch get mounted to the passenger side door post? 3) There's a single wire (green) coming out of the reproduction Dome Light. How is the Dome Light wired and grounded? Thanks very much for your help. |
Re: 1931 S/W Fordor Sedan Dome Light Wiring 1 Attachment(s)
Ford Service Bulletin page 468 June 1930
|
Re: 1931 S/W Fordor Sedan Dome Light Wiring 3 Attachment(s)
Does your dome light mounting wood look anything like this?
I had to make my own because the one I found at an old junkyard did not fit right, |
Re: 1931 S/W Fordor Sedan Dome Light Wiring Quote:
There is not a correct reproduction oval dome lamp made for the Model A Ford. The only reproduction dome lamps that I am aware of are the round ones for Coupe and Tudors. They mount more towards the center of the headliner. The oval dome lamps in the four door sedans and Victorias mounts above the rear window. |
Re: 1931 S/W Fordor Sedan Dome Light Wiring 2 Attachment(s)
Here's what it looks like on my 31 S/W.
|
Re: 1931 S/W Fordor Sedan Dome Light Wiring I would obtain a copy of the RG/JS and many of your questions will be asked
|
Re: 1931 S/W Fordor Sedan Dome Light Wiring Quote:
https://www.facebook.com/groups/MARC.group/ results in the below message "Sorry, this content isn't available right now The link you followed may have expired, or the page may only be visible to an audience you're not in. Go back to the previous page · Go to News Feed · Visit our Help Center" I am a member of MARC can I join the closed group? |
Re: 1931 S/W Fordor Sedan Dome Light Wiring Quote:
https://www.facebook.com/groups/MARCFordGroup/ |
Re: 1931 S/W Fordor Sedan Dome Light Wiring 1 Attachment(s)
Make sure that the dome light body is well grounded or the light will not work. In my Model "A," I soldered a second wire to the metal body of the light and ran it to a screw in the car body that I tested to have good ground continuity.
I also converted the dome light to LEDs. |
Re: 1931 S/W Fordor Sedan Dome Light Wiring These LEDs plug right into the standard socket. I also have them in my taillights.
https://parts.modelastore.com/show_Product.asp?ID=18460 |
Re: 1931 S/W Fordor Sedan Dome Light Wiring Quote:
Was never real happy with the cowl light brightness, but the dome light seems plenty bright with the 6V bulb, but going to try it anyways. |
All times are GMT -5. The time now is 10:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.