The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   28 9 brookville roadster (https://www.fordbarn.com/forum/showthread.php?t=257773)

48fordnut 01-18-2019 05:07 AM

28 9 brookville roadster
 

Any one putting together a B ville roadster body? . I have a back half of the body and need some clues.


Thanks,


jim

john in illinois 01-18-2019 04:26 PM

Re: 28 9 brookville roadster
 

Here you go.

https://www.jalopyjournal.com/forum/...dster.1099322/

John

JBill 01-18-2019 09:58 PM

Re: 28 9 brookville roadster
 

I'm glad mine was already assembled!

Randy in ca 01-19-2019 01:48 AM

Re: 28 9 brookville roadster
 

Brookville bodies have pretty much all the same parts to be assembled as original bodies have, but the parts don't fit together as well as originals do apparently. A lot of non-stock improvising done on the one in the Hamb link given above. Several differences in parts to be used depending if your going with a trunk or rumble seat. Post some pictures or describe the areas you're having problems with as well as you can.


All times are GMT -5. The time now is 09:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.