The Ford Barn - Flathead Main Bearing Identification

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Flathead Main Bearing Identification (https://www.fordbarn.com/forum/showthread.php?t=266446)

The Lucky Star

07-17-2019 07:13 AM

Flathead Main Bearing Identification

2 Attachment(s)

Good morning,

I have a set of NOS Ford flathead bearings. I was hoping you could tell me the size of these. Thanks!

Scott

flatheadmurre

07-17-2019 02:01 PM

Re: Flathead Main Bearing Identification

Look at the bearing shells for stamping...A2...C3...or something similar...
That slip looks like goverment orders i´ve seen before...hard to tell what it is from that.

barnfind08

07-17-2019 04:28 PM

Re: Flathead Main Bearing Identification

It is .010

The Lucky Star

07-19-2019 11:27 AM

Re: Flathead Main Bearing Identification

Thank you. There's no markings on the shells. Just the tags. Thanks. I'll assume .010. Thanks again.

19Fordy

07-21-2019 09:51 AM

Re: Flathead Main Bearing Identification

Check them with Plastiguage after install.

All times are GMT -5. The time now is 10:47 PM.