Points While checking my points I noticed that the stationary one had a round hole in it. Is this a normal condition?
Still learning Lee |
Re: Points Yes
|
Re: Points Thank you
Lee |
Re: Points Yep. Some do and some don't.
|
Re: Points I goofed
|
Re: Points new points were part of a tune up. you may want to get a new set of points.
|
Re: Points Quote:
|
Re: Points You should only replace points when the point blocks are bad or the wear block is gone.
Getting 40 years on a set of used points is completely possible. It takes a very smooth cam and regular lubrication. |
Re: Points The ones with the hole are less prone to making a PIT & a POTHOLE & last MUCH longer!
Bill Holeproponent |
Re: Points Quote:
|
Re: Points 1 Attachment(s)
Ah yes, the donut points to go along with the donut manifold. :D
8 and 9 are right on, plus the hole makes the points stay cooler. |
All times are GMT -5. The time now is 09:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.