Distributor paint The exterior of the distributor is semi-gloss black. Does the inside get painted or left natural?
|
Re: Distributor paint Natural
|
Re: Distributor paint Don't over paint the distributor because it will play havoc with your ability to generate a proper spark at the points.
|
Re: Distributor paint Quote:
Bottom of the distributor that sits on the head, and the ignition cable threaded hole should be paint free/clean. They are major ground paths for the points. Also where the lower ignition plate screws to the distributor body. Speaking from experience with a vendor rebuilt distributor. |
Re: Distributor paint 1 Attachment(s)
I paint the inside of the distributor when restoring one to prevent it from rusting. However, when painting a distributor both the inside and the outside should be carefully masked to prevent painting surfaces that are important for grounding purposes. The attached article is how I go about it.
Tom Endy |
All times are GMT -5. The time now is 02:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.