fuel fitting 1 Attachment(s)
hey guys, im needing to know the thread pitch on the fuel inlet for a 8ba script carb ..
is this one right ? thanks https://www.carburetor-parts.com/Bra...rb_p_3511.html |
Re: fuel fitting Says 5/8 x 18 on the web page.
R |
Re: fuel fitting |
Re: fuel fitting https://www.parts123.com/parts123/yb...~Z5Z5Z5~Z5Z5Z5
CARB FITTING 1/2-20 X 3/8"/HOSE/B 97- 94 Fuel Fitting-Brass This is the special fitting you need to screw into the fuel inlet on your Stromberg 97 and Holley 94 carbs.This is the eelco style fitting from the 50's, and has the correct Ford taper on the end to seal inside your carb. It is used with 3/8"ID rubber and plastic hose.Fitting is in brass. Sorry about the price on this fitting but it is custom made for us in small runs. - $8.75 Ea. https://www.parts123.com/parts123/yb...Z5Z5Z50000106a |
Re: fuel fitting That price doesn't seem bad to me!
|
Re: fuel fitting Pete those are what Im looking for,
Thanks, |
Re: fuel fitting Thanks to 38bill....
|
Re: fuel fitting Yes sir, thank you 38bill
|
Re: fuel fitting Thanks to Ford Barn!
|
All times are GMT -5. The time now is 10:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.