51 Mercury Flathead and T5 setup complete City:
eau claire
State:
wi
Price:
3000
Here is a complete 51 Mercury flathead , borg beck clutch setup and a T5 transmission.
This is a running 51 mercury flathead pulled from a restored 52 mercury (in favor of a small Block) I have videos of the engine running. Pan timing cover and rear main seals replaced . I wide belt system has been installed , along with new water pumps and belts. New old stock fan bearing setup installed as well. The clutch and adapter : flywheel turned , new ring gear installed . All clutch components are new . Flywheel pressure plate throwout and pilot bearings . Nos clutch rod and pin Adapter is speedway , throwout return spring installed. All have been assembled and tested. T5 is from an s10 , non world class with geared speedometer. Solid , All has been inspected and new seals installed . I sold the 32 coupe this was going in, now this has to go. 3500.00 try to find , source parts and a fit this setup. this is what it cost me , and the labor was free. Please contact me with questions , yes I am negotiable . I prefer not to split. Try to gather assemble and do this for my asking price . I will ship world wide Mike 715-Five 86-zero267 |
Re: 51 Mercury Flathead and T5 setup complete 5 Attachment(s)
here are some pictures
|
Re: 51 Mercury Flathead and T5 setup complete bttt price drop
Obo |
All times are GMT -5. The time now is 11:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.