The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   How to read a 1950 F1 VIN Plate off the firewall? (https://www.fordbarn.com/forum/showthread.php?t=126890)

dwertz2000 12-26-2013 02:38 PM

How to read a 1950 F1 VIN Plate off the firewall?
 

Trying to determine, if possible, the original color of my 1950 F1 pickup from the stampings on the firewall. It reads: 98RC260870 A TL.
Then next to the right of the plate are numbers/letter stamped directly on the firewall 512K1793.

Any help would be apprieciated :)

THANKS!

Ralph Moore 12-26-2013 03:02 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

If you can pull the vin plate off you may find the orig color under it. When I restored my 45 truck it was the only place I found good paint.

flatford8 12-26-2013 04:02 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

Keep searching on Google and you will eventually find a site that can break down the VIN. or see if the EFV8 club has an official restoration book......Mark

kendall 12-26-2013 05:36 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

1 Attachment(s)
Attachment 158682


this is whats on my 1949 f1 ..... don't know what it means also.

jdl 12-26-2013 05:59 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

Here's a link with some colors...might help?

http://www.clubfte.com/users/earl/Re...aterial_2.html

waterboychuck 12-26-2013 07:14 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

When I purchased my 48 F1 I found the original color inside the cab and on the firewall. It was grey. Now it's the original red offered in the year. Pick something that you like and go with that.

rotorwrench 12-26-2013 07:34 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

Prior to 51, those firewall codes were harder to decipher.
This discussion was a good one. http://www.ford-trucks.com/forums/42...ut-off-47.html
There are a few here on the Barn too. Some of the guys that responded on that forum also respond here as well.

mtflat 12-26-2013 07:38 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

Quote:

Originally Posted by dwertz2000 (Post 791090)
Trying to determine, if possible, the original color of my 1950 F1 pickup from the stampings on the firewall. It reads: 98RC260870 A TL.
Then next to the right of the plate are numbers/letter stamped directly on the firewall 512K1793.

Any help would be apprieciated :)

THANKS!


They're pretty easy:
9 - 49 or 50 and your's is close to the cutoff, it was probably a '49 but sold and titled in 50 (if you're sure of the title)
8R - 239 flathead V8
C - half ton pickup
260870 - actual serial number assigned to the truck
ATL - Atlanta assembly plant

Firewall:
5 - Sheridan Blue exterior color
12K - produced October 12, 1949 (at the time Ford was using the calendar year as model year for trucks)
1793 - vehicle down the line (doesn't really have much meaning that we have been able to determine)

Hope this helps!
Tim

dwertz2000 12-27-2013 12:07 PM

Re: How to read a 1950 F1 VIN Plate off the firewall?
 

Yes, Thank you mtflat, helps alot!!


All times are GMT -5. The time now is 06:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.