01A-10889 temp Bulb Adaptor
 

Does anyone know of a source for these adaptors. I'm trying to fit a NOS 1938 Ford temperature bulb into Edelbrock heads. The bushing fits but there's no flare seat for the bulb.

Re: 01A-10889 temp Bulb Adaptor
 

Don't know if this is what you are looking for but last time I needed a mechanical temperature bulb adapter, Napa had these in both 1/4 and 3/8 pipe thread.
https://www.fordbarn.com/forum/attac...4&d=1621506567



https://www.fordbarn.com/forum/attac...3&d=1621506567

Re: 01A-10889 temp Bulb Adaptor
 

ThirdGen has them.The ones 51 Merc mentioned - the bulb won't fit thru the opening.

Re: 01A-10889 temp Bulb Adaptor
 

Thanks for that. I'll check them out.

Re: 01A-10889 temp Bulb Adaptor
 

I found an NOS one and will put it on Ebay today starting at $5.


40larry

Re: 01A-10889 temp Bulb Adaptor
 

Third Gen doesn't list them and haven't bothered to reply to my email.

Re: 01A-10889 temp Bulb Adaptor
 

Calling him is better.1-844-327-5988.Barnfind08 on here(Southside Obsolete) is another source.I got mine from John Wolf & Co(OH) a few yrs back.

Re: 01A-10889 temp Bulb Adaptor
 

For 3rd Gen you need to call and talk to Michael, emails do not work (at least most of the time they don't). You will enjoy to the talk, great gut to work with.