control rods, spark and gas stuck 31 roadster---i read all old posts on this and one person said he was able to free up rods by penetrating oil---any ideas on how to get oil into rod channels? i thought about putting in a few drill holes for oil but not sure where to place them or any other ideas
thank you |
Re: control rods, spark and gas stuck Just keep spraying penetrating oil on the top bushing and lower end, then force it to move after a day or so. Slowly it will keep getting better. Don't use WD-40, as that can swell pot metal.
|
Re: control rods, spark and gas stuck Are they stuck at the top or the bottom? You can tell by trying to move the lever. If you get NO movement, they are stuck at the top, if you get a little, the rod is twisting and they are stuck at the bottom. In the first case, do as Tom said, in the second, do as Tom said and you might help things by giving the tube a tap or two with a hammer while someone puts a little pressure on the lever. As soon as there is any movement, you've won. Keep moving it back and forth while adding lubricant and it will come good.
Let us know how you go! |
Re: control rods, spark and gas stuck Those rods are very strong in torsion. You can horse on them pretty good. It will come out.
|
Re: control rods, spark and gas stuck thanks to all 3 who replied--3 great ideas - will try all 3 and all will probasbly be good--the members of ford barn are great
|
All times are GMT -5. The time now is 12:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.