30 Deluxe Phaeton Seat Rest So I am working on a 30 Deluxe Phaeton and I am missing the part that supports the front seat bottom pegs on the back of the seat from going backwards and on an angle on the rear floor pan. I have no idea what it is actually called and what it looks like. Any guidance is appreciated.
|
Re: 30 Deluxe Phaeton Seat Rest Try a piece of 1" X 4" board.
|
Re: 30 Deluxe Phaeton Seat Rest Katy…..
Uhhh…NO That piece endures a lot of pressure and weight Check with Bert’s he likely has one. They were reproduced once upon a time. The originals are made of a spring steel. |
Re: 30 Deluxe Phaeton Seat Rest It is a cantilevered piece that was bolted to the middle cross brace of the wood frame. I will try to get a picture of it for you...and I may have an extra one that was a 190A piece with a riveted outrigger for the smaller passenger seat....that can be taken off
|
All times are GMT -5. The time now is 11:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.