The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Looking for Sedan trunk and mounting hardware (https://www.fordbarn.com/forum/showthread.php?t=230881)

Chris Haynes 10-09-2017 11:24 AM

Looking for Sedan trunk and mounting hardware
 

I am looking for a sedan trunk and mounting hardware. I have seen some where the spare mounts behind the trunk. Any leads?

CHuDWah 10-09-2017 11:39 AM

Re: Looking for Sedan trunk and mounting hardware
 

http://www.varcoinc.com/

They have both tapered (sedan) and straight (coupe\roadster) back trunks. Not cheap but trunks are vinyl covered and felt lined 22-gauge galvanized steel whereas cheaper ones are wood. They also have racks and extensions for rear spare but I think trunk mounts behind spare.

Dave Mellor NJ 10-09-2017 10:43 PM

Re: Looking for Sedan trunk and mounting hardware
 

I have a Kari Keen trunk which was a popular dealer add on in the day. Look it up and you'll find lots of info. Since it replaced the rear spare it had a breacket to mount the spare directly on the trunk. When opened the whole top sides and back dropped down with the spare going under. I don't have the bracket or the mounting pieces but you could just mount it on a rack. I'll post pics if you like.

abachman3 10-10-2017 09:55 AM

Re: Looking for Sedan trunk and mounting hardware
 

I have my trunk mounted behind the rear spare. Works well... except that the lug nuts are a little tricky to remove with the trunk mounted... I just use a socket and ratchet... works well.


All times are GMT -5. The time now is 08:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.