Simmons Carburetor
 

Just restoring a couple of Zenith carbs, and in the cuboard was this Simmons carb. Bottom was "zenith 1" and top the letter"S". A brass
plate was pinned to the top stating the following:Simmons Carberator,
The Simmons Mfg. Company, Oh. Pat. 1815650. The float valve is not a zenith and the butterfly is steel . Any comments appreciated.
Grant

Re: Simmons Carburetor
 

I came across a simmons top casting for a 31 indented firewall that was mounted on a standard Zenith bottom casting.The Simmons casting is similar to the Zenith side bowl casting. The Simmons is said to be a superior carburetor to the Zenith. I restored the hybrid carburetor and it workd fine on my late 31 Victoria, however, I saw no difference than a standard side bowl Zenith. Without a bottom Simmons casting I believe you must lose something as there must be extra pasageways on the bottom casting that line up with the extra pasageways in the top casting. I have no idea what they are for, but they must be there for a purpose.

Tom Endy

Re: Simmons Carburetor
 

Could it be for an air balance tube? I think that's what it called.

Re: Simmons Carburetor
 

Exactly what I was thinking. Rod

Re: Simmons Carburetor
 

This may be a helpful thread;

https://www.fordbarn.com/forum/showthread.php?t=57988

Re: Simmons Carburetor
 

If a Zenith lower casting is used with a Simmons upper casting you will lose the high speed feature of the Simmons carb. . The Simmons lower casting has an open passageway to the float bowl. The Simmons carburetor has a passage in the upper casting that aligns with the passage in the lower casting. Unlike the model B Zenith, the Simmons doesn't have the jet in the upper casting, but draws through the open upper and lower passageways. Like the model B carbs, the Simmons has a slotted throttle shaft. When the slot in the throttle shaft aligns with the open passage to the float bowl, vacume draws raw gas from the float bowl and works similar to the model B carb.

Re: Simmons Carburetor
 

I would like to buy a SIMMONS Side Bowl Carburetor.

Not only for the performance but my wife's maiden name is Simmons.

It would make a good pair.

Please email me direct at: [email protected]

Re: Simmons Carburetor
 

I have an unrestored Simmons carb on the shelf. I will rebuild it some day, but for now am trying to build a good model B carb from 3.

Re: Simmons Carburetor
 

Hey Guys, great info on the simmons carb. I shure would like to see some pics of one with the Simmons bottom bowl.
Thanks . GRANT

Re: Simmons Carburetor
 

You are such a romantic!!!:D

Re: Simmons Carburetor
 

Well what about me, Mike?:confused:
I named MINERVA after a far away relative in Pat's family tree!! Skipped my mother-in-law, she had a FUNNY name.:eek: Bill W.

Re: Simmons Carburetor
 

Re: Simmons Carburetor
 

Attachment 109730

Attachment 109731


Gary in MN

Re: Simmons Carburetor
 

Here is a pic of one of my Simmons alloy carbs. Check the link that Mike V posted above for more pics and info. http://i193.photobucket.com/albums/z...rld/Jam823.jpg

Re: Simmons Carburetor
 

In a summer 1931 Western Auto catalog I have they are called the "Duplex Improved Carburetor"

Does someone have a Western or Other era catalog that shows the side bowl one.

Thanks

Re: Simmons Carburetor
 

I have an alloy version with Wizard improved on the brass name plate. I don't have a side bowl version. I'll have Deb make some more pictures and post them later.

Re: Simmons Carburetor
 

Hi,
i jut noticed the post on the simmons carb. During the last several years i have collected a total seven of simons carbs. Five of them are all different the other two are duplicates. I havn,t researched them so here are a few questions

how mainy different types of simmons did they make for model a,s

are there any publications ever printed on simmons


i noticed on page 79 of the book those wonderful unautherized accessories for the model a ford. Also they made acessories for .
Model t,s.

Thank you

al

































































those wonderful unautherized accessories for the model a:


















;d
























;

Re: Simmons Carburetor
 

Some nice picture of a Simmons Head and Manifold would be great also

Re: Simmons Carburetor
 

this is for 2many cars
i have an excellent 32 carb i would trade
if you would send Joop info on your simmons
if joop likes the simmons i would just trade straight across
tom

Re: Simmons Carburetor
 

What A great Deal!

[email protected]