Doodlebug engine mount question. 1 Attachment(s)
Have a doodlebug that I am working on. The front engine mount doesn't have the yoke that I'm use to. Can I install a yoke?
Geoff |
Re: Doodlebug engine mount question. That's an early 1928 frame. The front of the motor bolts directly on the frame. You can convert to the Y mount, but you need to cut that top part of the frame off. Good luck. Jeff
|
Re: Doodlebug engine mount question. That front crossmember is rather rare, as many of the 28's were cut off to reduce vibration. In a doodlebug it should not be a problem. If it were mine, I would leave it alone, and just bolt the engine to it.
|
Re: Doodlebug engine mount question. Thank you. I will leave it as is.
|
All times are GMT -5. The time now is 11:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.