The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Spare Tire for Roadster PU (https://www.fordbarn.com/forum/showthread.php?t=252595)

paulfisk 10-05-2018 08:46 PM

Spare Tire for Roadster PU
 

I have a 1929 Roadster pickup. Neither front fender has a well for a spare tire. Has anyone built some sort of carrier to mount a spare under the bed. There is plenty of room. Just checking so I don't have to reinvent the
wheel.

BILL WILLIAMSON 10-05-2018 08:58 PM

Re: Spare Tire for Roadster PU
 

A Friend used a spare tire hoist from a Toyota Pickup, to mount his spare under the back. Old Datsuns used them also.
Bill W.

George Miller 10-05-2018 09:27 PM

Re: Spare Tire for Roadster PU
 

Yes I did it. used a 19 inch motor cycle tire on my 19 inch wheel. Put a plate to the cross members of the bed with a long bolt in it. Then made a big flat washer turned a shoulder on it to fit the hole for the hub cap. then counter bore it for the nut. Cut a slot in the washer so you could put it on easy.

redmodelt 10-10-2018 08:06 PM

Re: Spare Tire for Roadster PU
 

Model T but same idea. Friend of mine mounted two 21" T wire wheels under the bed of his 26 Roadster PU in anticipation of going to Alaska on a tour many many years back.

Neil Mylar LakewoodCA 10-10-2018 10:06 PM

Re: Spare Tire for Roadster PU
 

My Briggs body Model A pickup has the spare tire mounted to the back of the cab.
A previous owner made a carrier out of wood.

Gerryde 10-11-2018 02:34 AM

Re: Spare Tire for Roadster PU
 

Hi folks my model A r/p i got a wheel well and cut the mudguard and fitted the wheel well in the mudguard worked out very good. Cheers Gerry.(NZ)


All times are GMT -5. The time now is 06:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.