Winfield Vibration Neutralizer I am looking for a rebuild kit for the Neutralizer or a contact for the manufacturer, Speciality Ford Parts/Antique Parts Co.? After 65000 miles the studs have loosened and the rubber bushings deteriorated.
A's Always Dave |
Re: Winfield Vibration Neutralizer Speciality Ford Parts is difficult to make contact with, their phone number is 626-288-2121, about the only way to contact them. Good luck!
|
Re: Winfield Vibration Neutralizer Thanks Jim,
The number I had was a fax, so had one of the girls at work help me send a fax today! I will try that number tomorrow. If I need to I can just reassemble it so we can get on the road to Dearborn. A's Always Dave |
Re: Winfield Vibration Neutralizer Couldn't put a 2 piece regular pulley on if it's giving you problems. ?
|
Re: Winfield Vibration Neutralizer Yes I could thought might not fit the hub pattern.
We went with this unit to move some mass forward on the crank. A's Always Dave |
All times are GMT -5. The time now is 09:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.