Can anybody here cut keys? Can anybody here cut keys? I need A1100 and A1127. Please let me know as I would like some keys made for my coupe. Thanks.
Jeff |
Re: Can anybody here cut keys? Contact Dick Crabtree
605-487-7229 [email protected] He may be able to cut the keys from the numbers. Dick is also very good at door lock restoration and Pop-Out Ignition restoration. Chris W. |
Re: Can anybody here cut keys? Thanks for that info, I appreciate it.
|
Re: Can anybody here cut keys? Suggest you go into site entitled 'model a ford garage' where you may find general information about the variety of keys (shapes, milling, etc.) made for A's.
The A1100 & 1127 #'s should steer you to specific codes from which the blank can be cut. Also, a specific key blank must be identified to which the code is cut. Basically, appropriate blank + code = correct cut. (hope this is helpful) |
Re: Can anybody here cut keys? Just had A & L cut me a key from the number.
Bob |
Re: Can anybody here cut keys? Dick is making me two keys. Thanks for the info guys.
|
All times are GMT -5. The time now is 12:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.