Drum Tail Light Socket 1928 Any know or have a picture of how the two wires attach into the early socket assembly. Are the wires bare or do they have bullets on the end of the wires. Thank you for any help on this.
|
Re: Drum Tail Light Socket 1928 There should be copper bullet connectors on the ends of the tail lamp and brake light wires. They simply plug into the bottom of the bakelite socket.
|
Re: Drum Tail Light Socket 1928 NOT the wires that connect to the tail light harness but the wires that connect to the SOCKET assembly. They go into two holes in the insulator. Bullet ends, bare wire ends that use a set screw?? How are wires attached inside of the socket assembly? This is for the early DRUM style tail light.
|
Re: Drum Tail Light Socket 1928 They plug into the Bakelite socket on the tailite
|
Re: Drum Tail Light Socket 1928 Thank you very much!!
|
All times are GMT -5. The time now is 04:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.