35 Columbia Vacuum Piping Does anyone have a picture of the piping for a Columbia in a 35 Ford. Need to see picture of lower firewall to transmission area. Have a good shoot of piping to control valve. Thank you Dave/Green Bay
|
Re: 35 Columbia Vacuum Piping Contact John Connelly. Online: columbiatwospeedparts.com Phone 951/719-4077.
|
Re: 35 Columbia Vacuum Piping Here are some pictures I took installing the vacuum line on my 36. Hope helps for what your looking for.
https://uploads.tapatalk-cdn.com/201...75ba354861.jpghttps://uploads.tapatalk-cdn.com/201...cb364d2a37.jpghttps://uploads.tapatalk-cdn.com/201...9133a77fdd.jpghttps://uploads.tapatalk-cdn.com/201...b35d73a1f0.jpg Sent from my iPad using Tapatalk |
Re: 35 Columbia Vacuum Piping Perfect. Exactly what I was looking for. Where are the T'ed lines going in the 3rd picture? One to the Columbia valve the other? Thank you very much. Dave
|
Re: 35 Columbia Vacuum Piping To the speedo cable shift valve?
|
Re: 35 Columbia Vacuum Piping Quote:
I used a vacuum speedo changer. https://uploads.tapatalk-cdn.com/201...8e186e6d32.jpg Sent from my iPad using Tapatalk |
Re: 35 Columbia Vacuum Piping Makes sense, never seen one. Mine has a lever from control lever to speedo changer. Again thanks a lot for the pictures. I like your fuse block. Dave
|
Re: 35 Columbia Vacuum Piping Is the 40 the same?
|
Re: 35 Columbia Vacuum Piping The 40 is different.
|
All times are GMT -5. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.