The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Valve Tool (https://www.fordbarn.com/forum/showthread.php?t=275802)

HCO41 01-23-2020 10:40 AM

Valve Tool
 

Some descriptions describe this tool for Ford Model A and T vehicles. Is it specific or a generic valve spring tool. Does it do the job?
Apparently it is an early version of a DZ tool because DEE-ZEE is spelled out on the orange release lever. I don't do pictures but, here is an Ebay ad for it:


http://www.ebay.com/itm/Vintage-Kay-...cAAOSwEphb~Grj


Howard

Jacksonlll 01-23-2020 12:20 PM

Re: Valve Tool
 

Their are a lot of valve spring tools. Some work and some don’t. This one should work just fine. I usually borrow several and pick the one that works best.

Jim Brierley 01-23-2020 01:46 PM

Re: Valve Tool
 

It should work, however I prefer modern 'C' clamp design, they are easier to use and leave more room for your fingers to get in there and work.


All times are GMT -5. The time now is 06:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.