The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Can anybody here cut keys? (https://www.fordbarn.com/forum/showthread.php?t=265099)

Vanspeed 06-18-2019 08:17 PM

Can anybody here cut keys?
 

Can anybody here cut keys? I need A1100 and A1127. Please let me know as I would like some keys made for my coupe. Thanks.

Jeff

CWPASADENA 06-18-2019 08:35 PM

Re: Can anybody here cut keys?
 

Contact Dick Crabtree


605-487-7229


mbcrabtree@aol.com


He may be able to cut the keys from the numbers.


Dick is also very good at door lock restoration and Pop-Out Ignition restoration.


Chris W.

Vanspeed 06-18-2019 09:46 PM

Re: Can anybody here cut keys?
 

Thanks for that info, I appreciate it.

monto 06-19-2019 08:21 AM

Re: Can anybody here cut keys?
 

Suggest you go into site entitled 'model a ford garage' where you may find general information about the variety of keys (shapes, milling, etc.) made for A's.

The A1100 & 1127 #'s should steer you to specific codes from which the blank can be cut. Also, a specific key blank must be identified to which the code is cut.

Basically, appropriate blank + code = correct cut. (hope this is helpful)

Bob C 06-19-2019 10:03 AM

Re: Can anybody here cut keys?
 

Just had A & L cut me a key from the number.


Bob

Vanspeed 06-19-2019 10:18 PM

Re: Can anybody here cut keys?
 

Dick is making me two keys. Thanks for the info guys.


All times are GMT -5. The time now is 07:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.