Checking Transmission Fluidmin 1949 Ford How to check the Transmission Fluid level in a 1949 Ford 8BA Engine with standard Transmission. Also, if fluid is needed where do you put it in and what type fluid would I need. Thanks very much.
Bob |
Re: Checking Transmission Fluidmin 1949 Ford You have a plug on the side of the transmission...you fill up to the level where it will come out the plug.
For gearlube there are many opinions...just make sure itīs safe for the brass syncros. I use normal 80w90 API GL3 nothing fancy. |
Re: Checking Transmission Fluidmin 1949 Ford GL-4 will be ok. Viscosity depends on how you like the way it shifts.
|
Re: Checking Transmission Fluidmin 1949 Ford Thanks to all who responded! FordBarners are Very helpful!!! Thanks very much!
Bob |
Re: Checking Transmission Fluidmin 1949 Ford Bob, One thing(of many) I didn't know when I first had an Overdrive with my standard transmission was add oil to the transmission only but drain both when changing fluid. Service manual does say that somewhere. Don
|
All times are GMT -5. The time now is 12:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.