Mallory (MSD) distributor cap Has anyone been able to obtain one of these? PN 271, month after month they say next month delivery. I paid over 6 mos. ago.
John |
Re: Mallory (MSD) distributor cap All the regular MSD/Mallory vendors are showing it backordered until , March 30th at the earliest.
A Sierra 18-5397, from a boat store, can be used. A lot of marine applications for the 4 cylinder distributor. |
Re: Mallory (MSD) distributor cap We have used V8 caps on the 4 bangers with NO problems,...and this was on race cars.
|
Re: Mallory (MSD) distributor cap Trivia: For more modern Mallorys, you can get an 8 Cyl cap that fits perfectly & just use every other hole! Looks COOL!
Bill Goofy |
Re: Mallory (MSD) distributor cap E bay shows a ton of them ready to ship........
|
Re: Mallory (MSD) distributor cap Quote:
John |
Re: Mallory (MSD) distributor cap Quote:
|
Re: Mallory (MSD) distributor cap Quote:
Interchangeable with the following: Mallory 9-29418, OMC 985218 |
Re: Mallory (MSD) distributor cap Are rotors available?
|
Re: Mallory (MSD) distributor cap Thanks Guys, The Sierra 18-5397 marine did the trick. Box says replaces Mallory 271B which I would guess is for a boat. Only difference I can see is a thin "O" ring in the cap.
John |
Re: Mallory (MSD) distributor cap Quote:
You came out ahead then ! That O ring is to prevent water from entering. Better quality item. |
All times are GMT -5. The time now is 11:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.