The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   OT 8BA to Jeep (https://www.fordbarn.com/forum/showthread.php?t=187766)

jimTN 01-25-2016 05:59 PM

OT 8BA to Jeep
 

Anyone done a 8BA to CJ2 swap, if so, please send private email.

GB SISSON 01-25-2016 06:19 PM

Re: OT 8BA to Jeep
 

Sounds so Old School. I love the idea. Larger brakes too I hope!

Ross F-1 01-25-2016 07:55 PM

Re: OT 8BA to Jeep
 

1 Attachment(s)
There was a guy on the old MSN Flathead forum who did that, and he was down in your neck of the woods as I recall. The only pic I have of it is this one, kinda silly. Somehow he even modified the heads to have the Willys script on them.

Vanspeed 01-25-2016 08:01 PM

Re: OT 8BA to Jeep
 

What the heck is going on with those hoses!

Ronnie 01-25-2016 08:09 PM

Re: OT 8BA to Jeep
 

They are everywhere.

https://www.google.ca/search?q=ford+...IBigA&dpr=1.25

R

compyello 01-25-2016 08:33 PM

Re: OT 8BA to Jeep
 

Maybe check out the CJ2A page, very good resource http://www.thecj2apage.com/forums/

jimTN 01-25-2016 09:04 PM

Re: OT 8BA to Jeep
 

I'm actually wanting to do this with a 50 4wd pick up which has the same trans as the cj2 and more room under the hood. I have the adapter to an 8ba type bellhousing but the clutch throwout stuff seems screwy.

Mike in AZ 01-25-2016 09:16 PM

Re: OT 8BA to Jeep
 

have seen a station wagon with flathead V8 on ebay before...not sure how it's done, but it's been done...lol....Mike

40cpe 01-25-2016 10:02 PM

Re: OT 8BA to Jeep
 

Quote:

Originally Posted by Ross F-1 (Post 1230182)
There was a guy on the old MSN Flathead forum who did that, and he was down in your neck of the woods as I recall. The only pic I have of it is this one, kinda silly. Somehow he even modified the heads to have the Willys script on them.

That was rocnroll. His interest was really Jeeps. Checking his profile, he posted last here in 2010, about the time Ryan took the Fordbarn over. I tried to find a picture of his jeep and flathead but all the pics have timed out.

GB SISSON 01-25-2016 10:06 PM

Re: OT 8BA to Jeep
 

I recognize those upper hoses. Bicycle inner tubes. I have used them as lower hoses on my run stand with the valve stem on both sides for easy draining as my shop is un heated. I'm thinking this guy just hasn't had a chance to run out to napa yet.

Ross F-1 01-25-2016 11:37 PM

Re: OT 8BA to Jeep
 

Quote:

Originally Posted by 40cpe (Post 1230280)
That was rocnroll. His interest was really Jeeps. Checking his profile, he posted last here in 2010, about the time Ryan took the Fordbarn over. I tried to find a picture of his jeep and flathead but all the pics have timed out.

That's him! I forget his real name, I used to correspond with him off and on.

Alaska Jim 01-26-2016 03:04 AM

Re: OT 8BA to Jeep
 

He used to refer to it as his " goofy jeep project "

Koto333 12-07-2019 12:41 AM

Re: OT 8BA to Jeep
 

Do you still have adapter for flathead to keep T-90?

40 Deluxe 12-07-2019 08:45 AM

Re: OT 8BA to Jeep
 

Quote:

Originally Posted by Vanspeed (Post 1230186)
What the heck is going on with those hoses!


Wrong radiator cap.

V8COOPMAN 12-07-2019 09:04 AM

Re: OT 8BA to Jeep
 

The same Jeep...better picture! No VACUUM on the cooling system (hoses) this time. DD


http://www.ewillys.com/wp-content/up.../12/engine.jpg

skidmarks 12-07-2019 09:15 AM

Re: OT 8BA to Jeep
 

The offy adapter i see them online and a few at hershey this past meet. Most of the time cheap

19Fordy 12-08-2019 11:22 AM

Re: OT 8BA to Jeep
 

V8: Is the battery inside the ammo box?

V8COOPMAN 12-08-2019 12:45 PM

Re: OT 8BA to Jeep
 

Quote:

Originally Posted by 19Fordy (Post 1829467)
V8: Is the battery inside the ammo box?


Ain't got a clue, but that would be my guess, especially with that substantial black cable protruding from within. I just found that picture on the interweb. DD

flatford8 12-08-2019 03:19 PM

Re: OT 8BA to Jeep
 

There was an episode of “My Classic Car” a while ago and a young man put a Flathead in a first gen Bronco. I think he was in Canada......Mark

swedishsteel 12-08-2019 11:45 PM

Re: OT 8BA to Jeep
 

I'm working on a '67 Mustang and haven't totally ruled out putting a '51 Merc flathead in it. Had a six in it originally. Have a 351w as well, but..............it would be fun at cruise nights!!


All times are GMT -5. The time now is 10:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.